Altivar 71 in partnership with Schneider Electric and Toshiba
The Fruit of a long collaboration of developers from SchneiderElectric with Japanese engineers from Toshiba is the Altivar 71. All the best that has been achieved in this direction in both companies embodied in the product Altivar 71. Altivar 71 has an excellent characteristics in different modes of operation, the circuit of the device is complicated, and easy controls remained. Altivar 71 can be connected to any network for data exchange, thus the device can be smoothly integrated into any ERP system to optimize driven processes.
Altivar 71 is produced under the trademark of Telemecanique on the concept of "SimplySmart". Altivar 71 designed to control motors from 0.37 to 500 kW of power from 200 - 240V and 380 - 480 V.
Altivar 71 easily used both in closed and open systems with the ability to adjust various parameters to ensure optimal use of resources and equipment. Altivar 71 fully complies with the requirements for such devices. Basically Altivar 71 integrated into the transportation, delivery of goods on conveyors. You can often find Altivar 71 and in industry, particularly in woodworking and in the mining sector.
Altivar 71 has an enhanced degree of protection and ensures in this way, the sustainability of the mechanism how is management. In the case of subsidence of the supply voltage up to 50% of the nominal value of Altivar Altivar 71 still continues to work in standard mode. Also this device can be optimally operate at elevated temperatures up to 50 degrees above zero. The voltage drops and all sorts of noises network device is not a hindrance because the Altivar 71 is equipped with EMC filter
Altivar 71 has a wide degree of protection at the level of the engine (this is all kinds of machines and pressure sensors), and at the level of frequency conversion.
Altivar 71 will not allow you to let the engine bypassing scheme thanks to the Power Removal. According to the rules and regulations this device complies with the third category according to the rules and regulations of EN 954-1. The Altivar 71 characteristics standardized by the line of IEC/EN 61508. As I wrote above Altivar 71 is a device with a fairly broad capabilities and performance, and most importantly very easy to program. The menu is fairly simple and unique simple. The control panel is located on the front of the device and has a graphical interface, if desired, may be made at any convenient point through the use of extension cords.
Learning particularly there is no need of either. Opened the manual and see what the process is and give options. If something is wrong in what that the register will Altivar just will not work adequately, but to burn you can not have it anyway. Menu control that you are not allowed to do anyway. Those who can access the technical menu will not drive registers are obviously not needed critical information. Under your settings you can create a custom menu, and will for example is constantly on the screen to see how the frequency changes according to the time ruler, or as increases or decreases in the aisles cycle supply current all-wheel drive.
Have to manage and quick launch menu that will allow you a quick way to put into operation this device.
Using the terminal, you will be able to produce and adjust, and adapt, or as is commonly said "Make adjustment according to the output parameters.
<<<< Back >>>>