Altivar 11 (Altivar 11)
Managed To start the engines from the minimum to 2.2 kW with success can be applied to Altivar series 11 ( Altivar 11). Asynchronous motors with three-phase connection start this Altiware very wonderful. Altivar has a degree of protection from interference and power surges on In class, which in principle is enough to start such equipment. Altivar 11 this is truly a masterpiece from Schneider electric in class Altivar 11 is the smallest in size among similar equipment in comparison with other manufacturers. Altivar 11 takes a basis vector control current, and in combination with high-quality protection is a unique and irreplaceable asset for any production. IN case there is no need cool that fence, Altivar 11 significantly better than any device. Altivar 11 can be applied at the construction site (for example working in tandem with the lift class "pioneer", this lift is equipped with an engine 2.2 kW and a gear actuates the lifting mechanism). It is also possible to supply power to all drive on the packaging production, in General, where the capacity is not large, but enough to manage simple tasks with a minimum of regulatory functions. This class of equipment, namely maybe you can meet in three categories, three types of export performance. For the Asian market, European market and the rest of the world. Each type of Altivar 11 is produced under the requirements of a particular country of delivery ( in different countries have different standards). In full completeness of Altivar 11 supports three standard supply voltage 120V,240V or three phase 230V. In the setup menu you can change all 10 parameters, but this at least enough to cover 90 percent of the world market of users interested in this equipment. If same as always, as the development of production, you need to add functionality, then use PowerSuite with it, you output all modes anywhere. Altivar 11 is a digital input that can be used very well to receive from the application.European quality and the European system of protection is the level of more protected equipment than what is made either in China or in the former countries of the socialist camp. Altivar 11 can easily be attached to corpse any control Cabinet. Can be attached to the mounting plate screws, and you can even wish to put on a DIN rail. This method of fixing is very relevant in the case when you replace Altivar 11 in case of breakage. The Altivar 11 has very small dimensions: 130 x D x 72 137 mm (model Altivar 11 - 0,75 kW, single-phase power is 240V). 4 sizes are available two versions: standard (with cooling radiator) and with the cooling plate (142 x D x 72 101 mm). The second option permits installation of a VFD on the housing of the mechanism that performs the role of a radiator. They can also be installed close to each other, greatly saving space in the closet.
<<<< Back >>>>
|
